Inflatable Event Tents
An inflatable event tent for maximum attention
Not only suitable as a shelter, it is also the ideal advertising medium thanks to the printing.
Fast and easy set up times
Fully customizable tents
Additionally, it is possible to print on the roof and the sidewalls as partial or fullprint to use them as advertising space. Our printing process furthermore allows you an individual colouring of the outer side of the roof, sidewalls and the inflatable structure.
One set. A million possibilities.
The tent creates the room, the counter is the ideal presentation display and the sitting tube invites to take a seat.
In sum, the perfect set to display and highlight your creative and individual design.
GYBE® Event Tents are modular and extendable
Modular and extendable
By using the Sun Shade or the Shade Extender you cannot only extend the shadow-casting side but also enlarge the printable advertising space.
The Removable Roof offers highest flexibility: With only a minimum of installation work it is possible to take off the canopy and exchange it with one of a different color.
Scope of delivery & technical details
|Length||3,2 m||4,0 m||5,0 m||6,0 m|
|Width||3,2 m||4,0 m||5,0 m||6,0 m|
|Height||2,7 m||3,0 m||4,2 m||4,9 m|
|Floor area||10,2 m²||16,0 m²||25,0 m²||36,0 m²|
|Height of doorway||2,1 m||2,2 m||2,5 m||3,3 m|
|Weight||13 kg||15 kg||19 kg||24 kg|
Set up times
|Modell 10Feet||Modell 4000||Modell 5000||Modell 6000|
|Double action hand pump||14 min||16 min||28 min||40 min|
|12 v battery pump||9 min||11 min||18 min||25 min|
|220 v battery pump||4 min||5 min||9 min||13 min|
Set up of the supporting structure
The inflatable supporting structure consists of a high-strength Dacron-shell. We use an elastic PU-foil for the hermetical interior hose.
This construction has been tested under heaviest conditions in the Kite-sports thousands of times.
The standardized One-Pump-System allows for inflation of the tent via electric pump or with battery powered pump through a central induction valve. This is done by splitting up the air streams into three air chambers through hoses. The tent is set up in under 5 minutes.
Our products apply to the highest production- and quality standards. If your tent has been damaged it can be repaired at our german service departement, quick and efficent. An overhaul will always be done with original material and applies to the strict GYBE® production standards.
Consultation free of charge
Although the high level of customisability GYBE® provides very short delivery times for all its products
We are pleased to submit you a custom-made offer.
Printing in its most perfect form - more brilliant than reality
The GYBE® Event Tent therefore attracts everyone’s attention and turns into a unique advertising space. Furthermore, the new printing process makes it possible to individually color the outer panels of the roof and sidewalls.
The printing result is extremely brilliant because the warmth gives the pigments a winning brightness and they durably adhere to the fabric. Sublimation printing is extremely suitable for large or fullprint designs. You can print over the complete length and breadth of the material, which enables the colorizing of the Roofs or Sides in your Corporate Identity colors.
Latex ink is digitally printed in photo-quality on the carrier foil. This foil is then cut to size according to the design and then transferred under pressure and heat on the surface of the material. Since the carrier foil is white, colored materials can also be printed. The printing result is absolutely brilliant, also on black materials.